Pedro raccoon
Copyright Claim
Pedro raccoon
Boost
55
57
15
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
1.2 h
1 plate
Boost
55
57
15
3
139
92
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x125.16mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO White Transmission Distance: 6
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.76mm) swap to White for the rest.
Comment & Rating (15)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
good!!
2
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Pedro Pe 😂
1
Reply
worked well👌 Printed it with Nobufil ABSx Black and Arctic White
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
very nice model and sooo funny to print
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
Planing to modify the model a bit to fit a bearing into it, would model a base and make it able to spinnnnn
1
Reply
Boosted
Print Profile
0.08mm layer, 2 walls, 100% infill
love it
(Edited)1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Made someone really happy with this one, thanks!
0
Reply
Boosted
Pedro
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
Alles super :)
0
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld