Original model is created by Thomas_63847 on Pintables. This Silica Dry Pod is for the standard AMS unit and will work with the Hydra Mod as well. This Silica Dry Pod is designed to work with a round hydrometer to monitor and display the humidity levels in your unit. Can print lid in different colors to have a two tone look. Works great at maintaining the proper low humidity levels in your AMS unit keeping your filament dry and improving your print quality for amazing printing results! Works much better than the pouches/ packets. Would highly recommend checking out Silica Dry Pods for your AMS unit to not only help improve filament longevity but also the quality of your prints. If you ever see your AMS Cabin Humidity drop below Green this will help fix that issue and maintain a proper low level humidity. Prefect to print with your favorite material, if you use a high heat material you can also use these Silica Dry Pods to re-dry your silica beads.

Check out our other Silica Dry Pods such as our ones for the side of unit, Square Hydrometer, and our regular ones without the Hydrometer.

This design does not require a support to print if you have your printer setting dialed in, however for those that would like the easy of mind please use plate #1 that includes support, for those that would like to print without support use plate #2. For those that would like to make a two tone one please use plates #3 and #4.

Plate #1 has the Dry Pod with Round Hydrometer with Support + Lid

Plate #2 has the Dry Pod with Round Hydrometer without Support + Lid

Plate #3 Has Dry Pod With Round Hydrometer without support

Plate #4 Has Lid

Print Times

1 silica box + lid will take about 2h 41mins, and the plate of 3 silica boxes with lids will take about 7h 52mins. I will also add a filling funnel that can be printed to add the silica beads into theses boxes to fill