Gran cuadro de Stormtrooper con su fusil,en una version distinta a: https://makerworld.com/en/models/391564#profileId-292589

he utilzado Hueforge para poder imprimir en 3d

Great painting of a Stormtrooper with his rifle, in a different version: https://makerworld.com/en/models/391564#profileId-292589

I have used Hueforge to be able to print in 3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Orange
At layer #14 (1.2mm) swap to Gray
At layer #22 (1.84mm) swap to Jade White for the rest.