This micro version of my f**k (fox-duck) design is possibly the stupidest thing I’ve made – and that’s not a short list. Matchstick included for scale.

Save this little friend for when you truly can only give the tiniest, itty-bittiest f**k. At 8mm tall, this f**k sends a message that you are not to be f**ked with.

This will require a 0.2mm nozzle. There is no multicoloured variant as it would waste around 1000x more filament purely in flushing.

The story of the f**k

Sometimes you find yourself out of f**ks to give, so why not 3D print some more?

This is the ‘F**k’, a unique fox-duck hybrid creature – hence the name. These small creatures are designed to be printed quickly and without supports.

• Check out the original model here!

Give a f**k to your friends and loved ones, if you wish. If you find yourself getting overwhelmed, you can tell them you have no more f**ks to give.

PS: A group of f**ks is called a cluster f**k.

Printing tips:

To print this with an FDM printer, you will need a sturdy raft or brim.

These were my settings that led to success. The smaller your nozzle, the more details you’ll get.

Layer height: 0.06mm

Nozzle: 0.2mm

Print speed: 75% of usual (I went from 200mm/s to 150mm/s)

Shells: 4

Infill: 0%

Cooling: 100%

Side note, this was a nightmare to try and photograph.