3D model description
A visit to a clients house and he had a print of Audrey Hepburn in her ivory white dress in his hallway. I was impressed with the pose and beauty of the picture so took a photo.
On my return I googled picture and looked to purchase the print for myself but thought why not sculpt and print her to add to my movie icons models. . so here she is.
There are two heads not removable , and 2 choices of model one with fixed skirt and one with removable skirt, the removable skirt is printed like a lithograph vertically and is 1.5mm thickness.
Like the “SIMPLY MARILYN - BY SPARX” model available here;
https://cults3d.com/en/3d-model/art/simply-marilyn-by-sparx
I will not produce any adult themed parts for this sculpture.
Based on Audrey Measurements of 33(32A Cup)-20-34 and 5Feet 7inches or 170cm Tall the Model is 1/6th scale therefore would be 283mm standing.
So model in “Leaning pose” 277mm or with base 293mm height.
Audrey parts
2 Arms
1 right leg for removable skirt
1 right leg short for filled skirt
1 left leg for removable skirt
1 left leg short for filled skirt
2 Heads
1 corset n shorts torso
1 short corset for filled skit
1 filled skirt
2 (front and back) piece removable skirt
1 Base one piece
14 items in total.
PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.
These orientations work for FDM printing but you may find a better orientation that reduces support.
All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.
Why cut into many smaller parts I have been asked?
1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers
So now you know!
Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print, make, enjoy.
3D printing settings
3D PRINTING SETTINGS
Resin Printing;
Hollow 2.70 Raft 100%
Head, Torso, Legs
DO NOT Hollow
gloves
FDM
Head, arms skirt removable 80% fill 0.12 speed 40
Rest at 0.16 30% fill, speed 50
ALWAYS dry assemble and “trim” parts prior gluing.
Look at the picture of how to assemble parts, so that you construct and paint separate before joining should you wish.