Fun Image idea I thought of and wanted to try a glow in the dark overlay. First image is it glowing in the dark, second image is it in normal light and the last image is it under a UV light. Enjoy these models of mine!

I had to upload just the stl file as the slicing time exceeded the limit of MakerWorld.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #12 (1.04mm) swap to Lilac Purple
At layer #21 (1.76mm) swap to Glow in the Dark for the rest.