Introduction

This clock has a transparent window through which you can see the M&M's that you put into your hollow & transparent clock.

You get to choose which colour M&M's you want to include, whatever best suits your design flair.

This is just one of my Filled Clock Collection.

How to use

The M&M's Filled Clock prints the main body in one piece and benefits from you having a transparent material (PLA or PETG for example) as without it - the effect doesn't exactly work as well.

You place your M&M's into the hole in the top whilst shaking occasionally (and gently) to allow you to fill it without gaps. Once you have carefully jammed as many M&M's as will fit, slide the door into the slot over the hole and your M&M's are as snug as a bug in a rug.

Choose the stand to mount it on a flat surface or use the hook for the wall.

Using the Stand

• Insert the stand into the bottom slot below the clock mechanism pointing downwards away from the door.

Using the Hook

• Insert the hook into the top slot above the clock mechanism and towards the hole.
• Insert the spacer into the bottom slot below the clock mechanism pointing downwards away from the door.

Included Parts

• Clock body
• Stand - so you can place it on any flat surface
• Hook & Spacer - to place it on a wall nice and flat
• Door - to keep your poop inside as it should be
• Hands - sized to the most common clock mechanism*

Required parts

• A clock mechanism, this can be purchased from Amazon (like I did) or the Bambu Lab Clock Hardware Kit should work, I have NOT been able to check as the U.K. still doesn't get them until sometime in May 2024!
• Transparent filament; PLA or PETG for example, without this you could use white, the transparent material is printed at a SINGLE 0.2mm layer.

Body Colours Assigned

• Blue = Body
• White = Numbers & marks, M&M's outline
• Brown = M&M's letters
• Transparent = See-through window

* I cannot possibly provide a set for all potential hole sizes. I recommend you use my Diameter Sizer 1.0mm to 5.9mm tool to determine the correct diameters and I may be able to create a set for you.