Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Go to the objects section if you want to change the color of the layers.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #17 (1.44mm) swap to Yellow
At layer #23 (1.92mm) swap to Jade White for the rest.