Hello World!

Here we have a 3d printable origami crane. It is designed to even print on your Bambu A1 Mini at only 120mm in size, and 0.4mm in height.

You will want to print this preferably on a smooth print surface, at a 0.1 layer height so that there are four layers of lamination. Otherwise, it may break when it creases.

Attached is an STL you can print right away. If you want to increase the size, you will want to make sure it stays at a 0.4mm Z height otherwise it may not crease correctly.

I like to play with different kinds of top and bottom infill types, to produce different effects with different kinds of filament. I'm excited to see what you guys can come up with! Cheers!