I have the Kallax door from "pjp." revised so that I can use this as a back wall for my freestanding Kallax shelf... as you can see in the pictures, I have my folders on one side, and now a work of art on the other side :-)If you want to make your own insert, you must use the following dimensions: 236 x 236 x 2.5-2.8mm.I added an attachment for the wall to the frame, so you can also hang the frame on the wall, and with the "Multiconnect" you can also hang it on the multiboard.
V2:
In the meantime, I was able to create a variant that no longer requires screws. A division into 4 equal parts makes it possible to print the frame horizontally, which now gives it the finish of the print bed. In addition, by cleverly arranging the Purge Tower, I was also able to print and insert Hueforge image in full size. Now I'm looking for a way to make the magnets unnecessary.
you need got V1:
ich habe die Kallax Türe von "pjp." überarbeitet, damit ich diese als Rückwand für mein freistehendes Kallax Regal... wie man auf den Bildern sehen kann, hab ich auf der einen Seite meine Ordner, und jetzt auf der anderen Seite ein Kunstwerk :-)
Wer sich einen eigenen Einleger machen möchte, muss folgende maße nutzen 236 x 236 x 2.5-2.8mm.
ich habe dem Rhamen noch eine Befestigung für die Wand hinzugefügt, so kann man den Rahmen auch an die Wand, und mit den "Multiconnect" auch an das Multiboard hängen.
V2:
Inzwischen konnte ich eine Variante erstellen, die keine schrauben mehr benötigt. Eine Unterteilung in 4 gleiche Teile ermöglicht es, den Rahmen liegend zu drucken, wodurch dieser jetzt das Finish des Druckbettes erhält. Zudem konnte ich durch das geschickte anordnen des Purge Towers auch Hueforge Bild in voller Größe drucken und einlegen. Jetzt suche ich noch nach einer Möglichkeit die Magneten unnötig zu machen.