HueForge of a promo art for the video game “Stray” featuring an orange cat.

Here is the full description :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 149.99x149.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 3.8
PLA BambuLab Basic Orange Transmission Distance: 5.4
PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.9
PLA BambuLab Matte Lemon Yellow Transmission Distance: 3.1
PLA BambuLab Basic Jade White Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
Start with Charcoal
At layer #15 (1.28mm) swap to Brown
At layer #16 (1.36mm) swap to Red
At layer #17 (1.44mm) swap to Orange
At layer #20 (1.68mm) swap to Mandarin Orange
At layer #21 (1.76mm) swap to Lemon Yellow
At layer #23 (1.92mm) swap to Jade White for the rest.
 

The .3mf file includes the color swap with AMS but you can also set that on your own slicer with the provided .stl.

There are 4 versions of the project :

• Brim + Prime tower (recommended)
• Brim + No Prime tower (slightly less filament wasted for slightly reduced quality)
• No Brim + No Prime Tower (requires good bed adhesion)
• No Brim + Prime tower (requires good bed adhesion)

Printing this with a 0.4mm nozzle could reduce the quality and details of the depth effect.