HUEFORGE MUSTANG PALMS
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Tough Gray Transmission Distance: 1.8
PLA BambuLab Basic Orange Transmission Distance: 10
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #7 (0.64mm) swap to Orange for the rest.