"Cups of Liber-Tea have been issued to every helldiver for morale support" 

Spread Managed Democracy throughout the galaxy with a cup of Liber-Tea by your side! An up to scale mug able to be printed with your destroyer's 3d printers using absolutely 0 supports. Contains an ergonomic handle and the spirit of Liberty imbedded directly into the very plastic this mug is made from. This design has been stored away for generations waiting for the moment the Helldivers will need it most; which is now! Print your very own Liberty mug today and spread freedom with it by your side during the years yet to come.

Extra Materials: optional, but if you wish to paint it (better then I did) then you will need primer (which I didn't use) and acrylic paint.

Print Settings: 0.24 layer height with a 0.4mm nozzle to print as fast as possible. 10% infill and a 2 layer walls. 2 top and bottom layers for speed. NO adhesion and NO supports.

                                      *Failure to print will be directly reported to the nearest Democracy officer*

Update: Made a second mug titled - 'Liber-Tea for Cans' - which has the dimensions of a 2.8" interior diameter which allows the mug to hold a can, like a can of coca cola or a beer. The original had interior dimensions of 2.6" which is exactly the dimensions of a standard 2.6x4.8" can. Print the normal ‘Liber-Tea’ if you want it extra tight, or print the ‘Liber-Tea for Cans’ if you want to fit a can but be just a little loose so different size cans can fit.