Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size with a 3mm border
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Hatchbox Black
PLA BambuLab Metal Cobalt Blue
PLA Inland Light Blue
PLA+ Inland White
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cobalt Blue
At layer #13 (1.12mm) swap to Light Blue
At layer #20 (1.68mm) swap to White for the rest.