NO support needed.

Make your mother the happiest woman in the world,

and ensure all her herbs or flowers stay fresh and hydrated.

---- This is the best mothers day gift ----

The Design is made to be a tribute to mothers out there, that have been doing an outstanding job raising you.

Its not only a trophy, but also a self watering planter (you know how mothers love multifunctional things - and flowers)

HOW IT WORKS

The self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).

Its a one piece print (uni body) with a clear and visible water reservoir, so you dont need to lift a inner pot, or rely on a floater to tell you how much water is left.

Simply just look in the in the reservoir, and fill it up if needed.

There are 4 water inlets in the planters, where it is recommended to use a wicking material at the bottom.

This helps to absorb water into the soil slowly and prevent excess moisture in the soil.

To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.

You can place a couple of cotton balls / cotton wool in the bottom of the pot.

The bottom has a light slope towards the center, so all the water is utilized.

Unibody - One piece print

Basic print settings:

• Infill : 10%
• Walls: 4
• Top/bottom shell layers: 3
• No support needed

Dimensions: Hight is about 135mm (155mm with arms)