Filament sample tile that uses 0.75m of filament, can be a useful way to use up the last meter of filament and create a way to preserve filament information.
Recessed area for writing brand, color and notes.
The tile is 3cm x 3cm and 3mm thick with a 2mm hole in the corner for keeping multiple tiles together.

If you have AMS, the top profile can print 4 color tiles in object mode. I personally find this a very convenient way of creating tiles for the loaded colors. In this configuration tiles will use between 0.72m and 0.95m depending on print order.

Without AMS, the second profile will print only one tile.

General 3d Printing Tips

• Make sure your printing plate is clean! Oils from your skin will cause adhesion issues for your prints. Regularly wash your print plate with a detergent like Dawn and avoid touching the surface when removing prints from the bed.
• If it's an option on your printer, always opt to level the bed before each print. If you have to perform this manually, make sure you do this after every few prints. It takes a bit of time and patience, but it's a fair trade for reliable prints.
• Ensure bed and nozzle temperatures are within the expected range for the material you are printing. Temperatures that are too high or too low will affect the print negatively by causing warping, malformed layers or adhesion issues.
• Reduce your printing speed. Slower print speed is especially important for overhangs because it gives the material more time to cool as it's deposited.