Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x249.42mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm
Filaments Used:
PLA esun deep black Transmission Distance: 0.4
PLA generic space grey Transmission Distance: 0.1
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA esun milky white Transmission Distance: 2.3
This print uses 4 unique filaments
Swap Instructions:
Start with deep black
At layer #4 (0.4mm) swap to space grey
At layer #8 (0.72mm) swap to Fossil Grey
At layer #11 (0.96mm) swap to milky white for the rest.