One of the first pots I've ever designed. The size shown in this picture is 4 inches (101.6 mm) tall with a 4 inch opening. This model is easily scalable to get the correct size.
My standard sizes are:
75% for 3 inches
100% for 4 inches
125% for 5 inches
150% for 6 inches
I used Bambu Basic White and Black as well as Elegoo Gray PLA for the prints shown in the pictures.
In the print profile I use is a version of the 0.28 layer height default with changes to minor things, like infill type. I find using 0.28 layer height gives a good result at a reasonable time. No supports needed.
If you print, please let me know what changes you made to the print profile if any and drop a picture.
Thanks and enjoy!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.