Description

Super Mario Bros NES Levels Magnets

These magnets roughly reproduce the first four levels of Super Mario Bros NES game

Note: Designed specifically for 0.06 layer height. Slicing at different layer heights will likely not produce the color/design properly. Some hues are achieved by using dark or light colors in the lower layers. This is a little trick to have more than four colors using only one AMS.
 

Note: The photos are printed with only one AMS.

Level 1-1 change configuration for print with more than one AMS
 

1. Select “Objects”
2. Select the plate for the level you would like to print (Level 1-1 ofr this example)

3. in “Objects” list find this elements and set white color

4. Change color from Sky Blue to White 

5. Slice plate and you can print with two AMS.

Note: If you find a description like “Blue or White” or “Yellow or White” in objects details list it means that you can change the color of the element to have a different tone. That depends on your filaments.

Level 1-2 change configuration for print with only one AMS

Same of Level 1-1 but remove White and use Yellow (coins) and Brown (platforms) instead

 

Level 1-3 change configuration for print with only one AMS

Same of Level 1-1: remove Sky Blue using White instead (cloud and flag)

Level 1-4 : No change needed

_________________________________________________________________________________________

Materials:

If you want add a magnet on the backside you can cut and glue these sheets (https://www.amazon.com/s?k=MAGNETIC+ADHESIVE+SHEET)

Filaments:

White – OVERTURE MATTE PLA (https://a.co/d/j13IHqZ)

Sky Blue – OVERTURE MATTE PLA (https://a.co/d/1DIiJFr)

Brown – POLYTERRA EARTH BROWN (https://a.co/d/1DIiJFr)

Black - POLYTERRA CHARCOAL BLACK (https://a.co/d/1DIiJFr)

Green – SUNLU META PLA GRASS GREEN (https://a.co/d/1cl2ypd)

Grey – OVERTURE MATTE PLA (https://a.co/d/c2winEz)

Red – OVERTURE MATTE PLA (https://a.co/d/1cl2ypd)

Hope you enjoy this print! Thank You!