X1C Rear Holes Cover
Copyright Claim
X1C Rear Holes Cover
Boost
122
264
49
GIF
GIF
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
17 min
1 plate
Boost
122
264
49
8
397
290
Released
Description
I was cleaning out my printer of little filament bits and strings and looked in these holes and they were almost filled! I whipped this little cover up to prevent this in the future. Have a look at your printer, do you have filament bit build up too?
I tested this with ABS, ASA, PETG and PLA.
Comment & Rating (49)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
it’s too thin. with one print it just bent a little bit and it doesn’t stay flat 😞
The designer has replied
0
Reply
If you like you can increase the Z dimension in Bambu Studio to thicken it. Won’t matter if the rest of it gets taller. Hope that helps!
0
Reply
Will try 👍
(Edited)1
Reply
WOW! COPY AND PASTE MY MODEL!
REPORTED!
GREAT JOB!
https://makerworld.com/en/models/426458#profileId-330278
(Edited)
The designer has replied
0
Reply
I understand the concern and that these look very similar but I designed this model on my own and you can download my Fusion 360 file to see my work. I uploaded the Fusion file as well as the STEP.
It's such a simple design solution there aren't many ways to go about it. Looking on the site there are a few others that are super similar as well. I assure you I did not copy and paste your model or even look at it for inspiration. I hope both of these models can coexist.
Here's more:
https://makerworld.com/en/models/434404#profileId-339229
https://makerworld.com/en/models/452173#profileId-359345
(Edited)5
Reply
Boosted
Replying to @DingusDude
Its actually kinda funny that almost all comments I read from that guy are rude comments where he is pretending to be the author of all inspirations, while there is clear evidence of him using other peoples design for his models.
Anyway, keep up your work and enjoy my boost ^^
3
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great idea 👍
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Works
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
really good model, prints perfectly and is a perfect fit for the back of my P1S printer
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
simple print and work!
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very usefull & fast Print! Thanks for sharing🤙🏻
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
quick print and fits Perfect :)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Thank you!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Fits well
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld