What's this?

This is a wall holder for a 1000ml bottle of Bacillol surface desinfect.

How to mount?

I recommend using wood screws (and screw anchors when working with dry/brick walls).
Personally, I used the following mounting material:

• 6x30mm Universal screw anchors
• 4,5x40mm wood screws → you can vary in length, but not in diameter
• (brick walls only) → ideally you would use a 5,5mm drill to get a tigther fit for the anchor

Parameterized model

You can adapt the source f3d file (find it attached) by simply changing some parameters. There are predefined “Favorites”, which make it easy to adapt the shelf size according to your boxes:

Margin

The margin between the bottle and the holder walls.

Currently set to 2mm which doesn't make a tight fit but is easy to lift and put back in. Simply reduce this value if you want to

I already added some sane defaults for margins, so you can just measure your box and type in your values. No need for additional inclusion of margins.

Printing line Thickness

When changing nozzles you may also want to adapt “printing_line_thickness” which will optimize some thinner walls.

Printing profiles

There's only one printing profile at the moment which is optimized for a 0.6mm nozzle (I chose the standard Bambu preset for this nozzle). Since there are no tight fits whatsoever, I guess you can just use a default profile for a 0.4mm nozzle and should be good to go.

The only significant thing I changed is the seam positioning. I set it to “Back”.

Changelog

mk.1

Initial and probably also final version

Support

If you appreciate this model and wanna buy me coffee, you can do so here: https://ko-fi.com/kellervater
Or simply scan this QR-Code: