Dragon Book Ends
Copyright Claim
Dragon Book Ends
Boost
53
59
4
Print Profile(1)
0.2mm layer, 1 walls, 45% infill
Designer
21 h
2 plates
Boost
53
59
4
2
35
7
Released
Description
Be sure to add a infill of at least 45%, so the bookends have some weight and don't move.
I also added some rectangles on the bottom of the model so you can use some anti-slip pads if you wanted.
Comment & Rating (4)
All
Could you please confirm that your current uploaded print profile is intentionally not using a any kind support structure?
I think there are many parts that really do need support to be printed successfully.
The designer has replied
0
Reply
Hi! Yes, you should use tree supports (auto>slim). Thanks for the heads up, I adjusted the print profile.
0
Reply
Changed infill type to adaptive cubic. Tree supports failed about half way through. Instead of continuing, I cut it in half and started over with a top half before gluing together.
The designer has replied
0
Reply
Sorry to hear that. The print profile that I uploaded worked good for me on the X1-Carbon.
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld