Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x99.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.3mm

Filaments Used:
PETG Kingroon black Transmission Distance: 0.3
PETG Kingroon Gray Transmission Distance: 5.5
PETG Kingroon white Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
Start with black
At layer #7 (0.64mm) swap to Gray
At layer #10 (0.88mm) swap to white for the rest.