Vaporeon - Pokeball Hueforge

This design was a Patreon subscriber request. Please check out my Patreon for more details if you're interested to know how you can request your own design as well, or acquire a commercial license for selling your printed copies of my designs. https://www.patreon.com/CanadianGamer3DPrintsEDM

Other Patreon Requests can be found in this Collection here: https://makerworld.com/@CanadianGamer/collections/1084474

The rest of my Pokemon designs can be found here:

https://makerworld.com/@CanadianGamer/collections/1043336

-----------------------------------

The pictured Frame is a friction Fit design here for 100x100 or 100x150 Hueforges
https://makerworld.com/en/models/173529#profileId-190705

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Matte Marine Blue Transmission Distance: 3
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Marine Blue
At layer #17 (1.44mm) swap to Ice Blue
At layer #23 (1.92mm) swap to Jade White for the rest.