got a download link for that spool holder? :P

Hi! I have added few more pics and the assembly setup, with some additional information. The only thing missing on the assembly settup is the stepper spacer. I gave up on the stepper spacer in the files and use small round spacers between the motor and the Titan, because of the improved cooling with this setup vs the stepper spacer plate in the design.

Thanks for the help. Looking forward to the pics.

Hello racerbo, It is a fairly simple assembly. Stepper, spacer, Titan, mount and finally wire holder by that exact order. I suggest holding the mount, Titan, spacer and stepper aligned and then screwing in the bottom left screw which goes through the cylinder first (have stepper turned so the wires are on the bottom). Then the other bottom screw and then finally add the wire holder and screw in the top 2 screws. Unfortunately I won't be able to take the assembly pics for at least a month (on a trip away from my UM). After that I certainly will, because I added additional stepper heat syncs for intense retractions. Hope this helps

Hi, Interesting design. Could you post more pics of how the parts are assembled? Thanks

Stepper: http://goo.gl/XeVZUk

Can you provide a link to purchase the motor?