Loading
Baby Groot
Published 2017-01-12T14:08:29+00:00
Baby Groot
Published 2017-01-12T14:08:29+00:00
Famous baby Groot. As people wanted, the head and the body is merged to one single printable model, including 2 versions: normal sitting version and a waving version. No support required for both. Happy printing.
Date published | 12/01/2017 |
Technology | FDM |
Support Free | YES |
Printed with Super Helper SH105 from Winbo, with Winbo Brown PLA 60 microns resolution
Absolutely love this little guy! Amazing job and thanks for the opportunity to print this!
baby groot airbrushed
My baby Groot~
Really great model, super cute and not to hard to print.
printed on Wanhao DLP Duplicator 7 resolution of 80micron
Printed on Ultimaker 3 .06 Layer Height 30% Infill Sanded and Painted
Hatchbox Wood PLA, .1 layer height
Printed Groot with glow in the Dark PLA, the model works good, very good detail of Groot and I didn't have to use any supports or rafts printed it at %20 infill.
Print by T3D mobile 3D printer that can directly prints from the light of your mobile devices. Take a look: http://myt3d.com/
Filamentive rPLA @0.05mm layer height 10% infill. yes it does mean a 32 hour print but worth it for the detail and minimal post processing
Beautiful design, I created this video to go along with it https://youtu.be/un7RkNceMgY
0.12 layer . 30mm/s print speed.MS hot end.Pure Perfection.
pla 15 infill 55 hotbed risoluzone 0,20
Thank You for fantastic model
Shrunk him a bit for the first print. Printed in PLA with no supports on a Creality Ender 2. He was gone less that 24 hours later as my nephew claimed him
I found the best use for my wood based PLA. no just need to print the other version and paint them a bit. Great design
Byambaa's Groot. Painted with acrylics via brush and airbrush.
My Father really wanted one. Since it's supposed to sit on his desk at work, I didn't sand it before painting and I didn't put THAT much effort into paint-job (since it's could be damaged easier in the office. Doesn't mean I didn't put any effort, I did, but it could've been done better). Acrylics. 0.2, infill 30%
0,2 15 hours
Amolen Wood PLA, no supports
Awesome!!! Great model!
Always a fun print and paint!
.15mm @210°c with eSUN pla. Time:23hrs approx.(With supports)
Great model thanks
Love this model! Thank you very much! I would love to have a go at painting it but I’d probably ruin it as I’m not the artsy type! EDIT: Had a go, turned out lovely!
Gold PLA BY Esun. Printed at 100%,40%,and 25% scale with no supports. Super easy and super cute print.
Awesome model! Printed at 60% size, 0.15mm resolution. First print to paint, i'm happy.
Turned out amazing, thanks!
Printed mine already a while ago. Just remixed it with a lighted brain. So on long drives with a nightliner it's on the dashboard. And when i go asleep i switch the light/brain on. ;-) dreamtime...Underneath the piece of "green" is a 3D printed box with batteries and a switch.
Stringy filament. Lowered temperature to 190°C at the head
how about a 15% size print? YAS!!
Just finished Baby Groot in time for Christmas for a present
Gerade baby groot fertig gestellt,..
First attempt. Very great model, to print and paint easy. Thanks to Byambaa Erdene
First Attempt, Plawood. very nice model
Left Groot printed at 25% scale with 0.12mm layers. Took around 1.5-2 hours to print. Right Groot printed at 75mm height at 0.12mm layers, took around 5-6 hours to print.
This is my baby Groot, print at 0.2 in white PLA and my first time when i paint some figures :D
Amazing model, thanks. Also my first time painting
Nice model.
i made few with different sizes, its nice and fun object :)
my first print on 3d this is my groot wood PLA on ender 5 plus
Le modèle est parfait. Merci beaucoup J'ai ajouté des éléments de décor pour mettre en valeur Bébé Groot (Trouvable sur le site)
Thanks for sharing
my first ever print with wood pla and it worked pretty good. it is .12mm layer and it didn't turn out as good as i was hoping but i dont know if its the filament or something im doing wrong
Belle impression
Well done
suoer modèle vraiment réussi
Great model!!
Filament Francofil Café Temp 210 Bed 50
This model is so good. So detail.
I am groot
Printed with a Voxelab Proxima
First print ever! Printed on Elegoo Saturn with Elegoo Standard Grey resin.
Hand-painted with Army Painter acrylics || Printed on Elegoo Mars 2 Pro with Elegoo Water-washable resin (grey) || For my father.
Awesome!
I am Groot
My first painted model!
Great model
Phrozen Transform at 0.05 mm Layer Height
Great looking design, I absolutely love this print!
My first test print and it looked great
Lots of fun to paint. Thanks for uploading!
Scaled to 80%