Removable Folding Spool Arm for Lulzbot Mini

Prints (0)

Description

SummaryWhen we built the enclosure for our Lulzbot Mini 3D printer, we needed to replace the stock pivoting spool holder, so we designed a bracket to mount a removable spool arm. The first version was just a hack (literally - we hack sawed the bottom off the stock arm, and made it removable, with the printable bracket we designed. We also made a printable version of this where we hacked off the bottom in OpenSCAD. But we were never really happy with that solution, so here is an improved spool arm. This one uses the same bracket, as the old hack, but it changes the upper end to pivot and fold up for storage. We're really please with the final product. And, it is still printable, and we made it sow that both pieces fit on the build platform of the Lulzbot Mini. (the stock arm did not.) Now you can print your own removable-folding spool arm. This project is part of our effort to improve our enclosure kit for the Lulzbot Mini. If your're interested, the kit is available at: http://drazzticaction.com/products-page-2/3dprinters/lulzbot-acrylic-enclosure/ Enjoy, Jim Rasmussen TabSynth Design Works Madison, WIPrint SettingsPrinter Brand: LulzBotPrinter: MiniRafts: NoSupports: NoResolution: StandardInfill: 10 or 20 Percent is fineNotes: It needs to sit diagonally on the build platform to fit on the Lulzbot MiniPost-PrintingAssemblyUses two M5 bolts or a single long one. We designed it to reuse the two bolts that came with the stock arm, that way you don't need to buy anything. Just unscrew the two bolts from the old arm and screw them in from each end to secure the pivoting arm on the pillar. Simple as that!

Design Files

File Size

Filament_Arm2V1Combined.stl
1.82 MB
ArmBracketBackingPlate.stl
463 KB
ArmBracket.stl
742 KB
Filament_Pillar2V1.stl
1.56 MB
Filament_Arm2V1.stl
415 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×