Anycubic Mega Series quick fit carriage system - 4 in 1 machine

For quick-release attaching stuff to the front of your x-carriage.

Designed specifically for the Anycubic Mega Series, but should also fit almost any vertical 50mm rail spaced printer with the same bearings and rod diameters.

Please note that I currently use this, and I have had great print results, just need to improve the cooling.
This system allows the quick change of tools in the press without changing the original structure.

It makes more space on the print table to use the laser head, allows you to use a pen to write and turns it into a cnc with a 775 motor as a spindle and speed controler.

I appreciate that anyone who wants to acquire this system to leave feedback on necessary improvements or to add new tools.

So the anycubic mega pro becomes a multi-tool machine.
Your 3d printer to quickly transform to use:

• swap out a clogged hotend
• different hotend setups
• laser cutter and engraver
• pen and marker plotters
• CNC mill
• food extruders
• ceramic and clay extruders
• dial gauge indicator
• drag knife and vinyl cutter endless possibilities!

In this system the printer works normally, but if you want you can change the limit switch on the Y axis plus 10mm forward and the machine stays at absolute 0 without changing the firmware.

Or

Change the G-code parameter m206 and change the source values ​​using the pronterface software.

Note:
Print the PETG or ABS parts because of the print head temperature, the center base must have almost 100% infill
15 M3x16 screws are required to mount the brackets.