Scissor Paint Rack - Vallejo - Tray locking tab
Scissor Paint Rack - Vallejo - Tray locking tab
3D
Published 2022-09-12T08:56:28+00:00
This is a small locking tab, 2 of which will help secure fhuable's Scissor Paint Rack for Vallejo paints (https://www.myminifactory.com/object/3d-print-scissor-paint-rack-vallejo-185010) in an upright position. I designed this tab because I wanted to store my racks inside a cupboard, but didn't want them to unfold under their own weight.
Each tab slides in place over each of the stand-legs, preventing them from folding out. The rack is stable enough this way to stand on its own. It's a friction fit, there's no need to push them all the way down, just push them down until they're tight enough.
The margins are tight, and it's a friction fit, so you'll want a well-tuned printer.
I printed mine at 0.2mm layer height. It's a very small/thin object, so with around 3 walls you'll end up with a solid piece.
Can be printed without a brim if you've got good bed adhesion (and I'd advise it, to avoid the leftovers of the brim making the fit even tighter).
| Date published | 12/09/2022 |
| Material Quantity | Under 3 grams per clip |
| Support Free | YES |
