Nexus 6 Phone WIRELESS Charger/Holder for Motorcycle

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/k2ghCqhdEDw

I own a 2015 FJR1300 motorcycle. I mounted a RAM ball in the opening next to the clutch reservoir. In one photo, you can see the new ball mount. I am going to move my smartphone mount to this new ball mount. In addition, you can see my power cable going down into the glove box. I have the power cable plugged into the power socket and the door is just closed on the cable. In the second photo, you can see that I used a RAM bracket to go from the ball mount up to the smartphone holder. If you look carefully, you can see that I attached a RAM mount into the back of the 3D printed smartphone holder. In the third photo, you can how I built the wireless charger into the 3D printed smartphone holder. This specific wireless charger works exceptionally well.

Here is a list of my supplies:

• 3D printed smartphone holder made specifically for the Nexus 6: https://www.thingive...m/thing:2352380
• Back plate to add a ball mount to the back of the smartphone holder (also need screws): https://www.amazon.c...duct/B004O8LF26
• Connector: https://www.amazon.c...duct/B000UGZTQO (long version) or https://www.amazon.c...duct/B002L9LW00 (short version)
• Ball mount to screw into opening next to clutch reservoir (RAM-B-349U): https://www.amazon.c...d/dp/B0036G97DG
• Samsung Wireless Charger - I got it on sale for $19.95 - it must be this specific model number to charge the Nexus 6 because of the phone's curved back: http://www.frys.com/..._string=8928043

Here is more info about the Ball mount next to the clutch reservoir (you must be a registered member to view -- registration is free): http://www.fjrforum....mount-location/

-