Skeleton Coffin
$2.50 Skeleton Coffin
3D
Published 2022-10-03T11:21:12+00:00
This coffin contains a spooky surprise! When the grave stone is lightly pushed back a skeleton, powered by a rubber band, breaks out of his coffin to see who disturbed his slumber. This is a print in place design. No supports and no assembly. You will need to stretch a #4 rubber band across two posts on the bottom of the box. Add two rubber bands if needed.
After you trigger the skeleton he can be easily reset. Simply push him back down until the latch on the head stone clicks in place. Then fold the sides of his coffin back over him.
This model easy fits on a Ender 3 or similar sized printer. Works best when printed at full scale. If needed it can be scaled down by 10% as long as your printer is not over extruding. Scaling up works great.
Skeleton Coffin operation video: https://youtu.be/8yciLa_z8oA
If you like this model check out the rest of my models here: https://cults3d.com/en/users/GladiatorDesigns3D/creations
3D PRINTING SETTINGS
For print settings I used:
PLA
No support
No assembly
.6 nozzle
.2 layer height
15% infill.
| Date published | 03/10/2022 |
| Price | $2.50 |
| Support Free | YES |