Genshin Impact - Layla Clothing Accessories

This model is designed for Layla cosplay from Genshin Impact. If you get the ready make costume, some of the parts may come pre-sew.

You can check the picture with parts labelled to their file name in the preview section to get the parts you want to print.

All the parts come with flat face that can lay on the printing bed easily. There is a picture of parts arranged on the printing bed in the preview section where you can refer to.

For the chain component, "chain 1" is the design located below her chest area, while "chain 2" is for the one above her chest. There is a tunnel of 2mm punch on the model. You can use anything smaller than the tunnel to chain them together.

You will need multiple copies of part B for the accessories on the chest and chain.

Part I and J are the accessories located on the tip of her dress. I provide two version size for you to choose. Base on the official art, the one closer to the front is smaller, however, the size difference is negligible, you can print multiple copies of either I or J. You will need two copies of each set to make it a full volume or you can escape with just one side to save some PLA.

Part D and E are accessories that attach to C. If your printer is not good in printing small part, you can scale it up. Please use brim especially for these two parts.

For scaling, all the part can be scale with individual factor as they are not connected.

Cheers and Happy Printing!

Layla related:
Genshin Impact - Layla Accessories
https://cults3d.com/en/creations/genshin-impact-layla-accessories

Genshin Impact - Layla Head Accessories
https://cults3d.com/en/creations/genshin-impact-layla-head-accessories

Genshin Impact - Layla Thigh Accessories
https://cults3d.com/en/3d-model/game/genshin-impact-layla-thigh-accessories