Like and Subscribe - Backlit - for Color Change Print

A more refined way to beg for engagement. This is a subtle reminder for the background of your video without shaking a virtual coffee can of pennies in front of your viewer's faces.

if you want to do me a solid and like 3D prop making 'how-to' videos subscribe to: https://www.youtube.com/c/Props3D/ (see what I did here? that's thinking outside the box)

Making This:
Print the back as it's own thing, in red preferably, but any color will do. Then with front plate use the 'pause and change filament' option on whatever the first layer ABOVE the base layer (where the text starts is the change point, it's layer 9 for me). Start with white, change to red.

The back as space for 10mm LEDs. There's a gap connecting the top and bottom so you can run one single strip around the whole edge/ I would suggest the 12v ones that plug right into an adapter. Put foil on the back or it won't light evenly. I've left an 8mm hole in the back you can run wires to or simply install an 8mm jack, the size those adapters generally connect to. Happy hunting!

Final Rant:
"Hey guys! Don't forget to mash that like and subscribe button guys!" I don't like that crap, you don't like that crap. Noone likes that crap. If you're looking at this model you're probably a creator. Don't do this. Bad. No.
... and everyone needs to stop saying 'guys' every second word, argh. shakes old man fist

DO NOT SELL, PERSONAL USE ONLY!

-