Pocket Operator Case

These files are for Personal Use Only. If you would like a Commercial License to sell prints made from these designs, please join me on Patreon: https://www.patreon.com/kazitoad

This is a fully enclosed case and button set for the Teenage Engineering Pocket Operator series.

It protects your Pocket Operator, while making it easy to hold, push buttons, and look great!

The case is composed of three components: a front, a back and a button matrix.

The buttons are all fused in a matrix to make both printing and assembly more straight forward. The buttons and button holes have been designed to allow the LED light to pass through regardless of the filament transparency.

There are two versions of buttons, one with and one without text. There are also two versions of the case front, one for Pocket Operators that still have the hanger and one without (#breakthehanger 😉).

The only additional components you will need are: 8x M2.5 nuts, 6x M2.5x10 and 2x M2.5x14 machine bolts.

All of the components should be printed flat-side-down, and the "back" piece is the only one that needs minimal support. All of the holes should be drilled out before inserting the bolts.

I suggest:
0.2mm layer height, 0.4mm line width, 3 walls, 4 top/bottom layers, 10% infill, co-extrusion filament 😄.