HARPA - LIRA Music Instrument

This is a Toy or a fake instrument (harpa or lira). I looked on the internet and didn't find anything similar that could satisfy me. At the request of a friend, I decided to develop the piece in 3D and now I share it with you for those who want to purchase. The requested value is symbolic and only serves to help with development for things like this. ATTENTION that this piece is not a real musical instrument, it only serves as a toy and if it is printed on Filament with an original and beautiful color, it can even become a pleasant piece of decoration - I decided to print it on Gold Bronze filament, as you can enjoy in the photos! There are two accessories that allow the placement of dummy strings that increase the quality/reality of the final object.
(sorry for my poor english....i'm portuguese)

»I printed in a Creality CR10-V2«

Dimensions: 37,5x24,5x2,50cm

My settings_
Layer height: 0.28 (if you want more final quality you must decrease this value - for me this is more than enough)
Wall Line count: 2
Infill density: 40%

Notes:
- use RAFT for better bed adhesion as the main part is very high and thus minimize the risk of failure;
- I left a margin to allow the easy fitting of the pieces (accessories) but a little sanding may be necessary - after placing the false musical strings, glue everything with epoxy glue (because it is a much more resistant glue than simple super glue);
- If you are careful when sanding, it will not be necessary to use glue as all the elements will be snug;