Skip to content

Guitar Hero / Clone Hero - Mechanical Conversion Kit

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.2k views
  • 3 likes
  • 93 downloads
License
3D design format
Folder details Close
  • GH5_WT_RJ11_USBC_Breakout_Holder.stl
  • clone-hero-wallmount.stl
  • gh-fret-10.5mm-curved_not_xplorer.stl
  • gh-fret-10.5mm_not_xplorer.stl
  • gh-fret-10mm-curved_not_xplorer.stl
  • gh-fret-10mm_not_xplorer.stl
  • gh-fret-11.5mm-curved_not_xplorer.stl
  • gh-fret-11.5mm_not_xplorer.stl
  • gh-fret-11mm-curved_not_xplorer.stl
  • gh-fret-11mm_not_xplorer.stl
  • gh-fret-12.5mm-curved_not_xplorer.stl
  • gh-fret-12.5mm_not_xplorer.stl
  • gh-fret-12mm-curved_not_xplorer.stl
  • gh-fret-12mm_not_xplorer.stl
  • gh-fret-13.5mm-curved_not_xplorer.stl
  • gh-fret-13.5mm_not_xplorer.stl
  • gh-fret-13mm-curved_not_xplorer.stl
  • gh-fret-13mm_not_xplorer.stl
  • gh-fret-14.5mm-curved_not_xplorer.stl
  • gh-fret-14.5mm_not_xplorer.stl
  • gh-fret-14mm-curved_not_xplorer.stl
  • gh-fret-14mm_not_xplorer.stl
  • gh-fret-15mm-curved_not_xplorer.stl
  • gh-fret-15mm_not_xplorer.stl
  • gh-fret-rubber-grommit-set.stl
  • mechanic-fret-switch-holder_v2.stl
  • mechanic-strum-switch-holder.stl
  • mechanic-strumbar-kramer-xplorer.stl
  • mechanic-strumbar-les-paul.stl
  • mechanic-strumbar-wt_gh5.stl
  • whammy_plug_6mm_id.stl
  • whammybar_square_pot_holder.stl

Learn more about the formats
Publication date 2022-11-12 at 22:17
?
Published to Thingiverse on: 2022-07-19 at 23:54
Design number 921101
xstasy

xstasy

3D printer file info

3D model description

#####This is an attempt to open source as many as possible of the parts for the Guitar Hero / Rock Band controllers to turn them into mechanical models. If you have modelling requests or contributions that aren't filled yet (still plenty parts to go) don't hesitate to get in touch so we can keep it all collected, with proper attribution of course!

Update October 13th

#####Added: Guitar Hero Fret Rubber Grommets

#####Coming:
Xplorer frets.
Whammy bar housing for select models.
Wii-mote cover + backside.
Battery covers

##Frets:
Fits any Les Paul, World Tour, Kramer, Warriors of Rock and GH5 Guitars (PC/Wii/PS3/Xbox)
13.5mm fits in most models (with the fret switch holder)
Print-note: Infill 5-20% and supports. Also verify print orientation for overlapping lines on the pushing side of the fret, orient as necessary.
###These are not for original switches!

Print-note: Rotate to standing angle. Infill 3% (lines) 10 line brim at 0.1 for smallest weight and highest quality, add more infill if you think the buttons are too light. At the settings mentioned each fret weighs in at 1.93g after printing.

##GH Fret Rubber Grommets (eTPU 95A filament):
Should fit almost any Guitar Hero Fret
Print-note: 20mm/s speed, 0.1 layer height, 20mm/s retraction speed, 1.4mm retraction. No Z-Hop.

##Strumbar:
Note: There are three strumbars, they fit Les Paul, WT/GH5 and Kramer/Xplorer.
Needs mechanical strum switch holder bracket for low profile mechanical switches
Print-note: Infill 100% and supports.

##Mechanical Fret Switch Holder:
Should fit any Les Paul, Kramer, Xplorer, World Tour and GH5 Guitars
Has been redesigned from ground to ensure compatibility with more guitars, in addition to taking less space and allowing for simple cable routing.
Print-note: 0.2 - Infill 100% - Supports.

##Mechanical Strum Switch Holder:
Should fit any Les Paul, World Tour, Xplorer, Kramer, GH5 Guitars
Print-note: Infill 100%.

##Guitar Wall Hanger:
Fits any guitar with a normally shaped neck (wouldn't try with the Logitech)
Print-note: Infill 50+%.

##USB-C RJ11 Port Replacement for GH5/WT
USB-C Breakout that fits: https://www.aliexpress.com/item/1005002795893679.html
Print-note: Print with USB-C hole facing buildplate with supports (only touching buildplate)

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.