Dice Goblin Barrel
$2.50 Dice Goblin Barrel
3D
Published 2022-11-17T09:43:14+00:00
For all you dice goblins out there here is a barrel to stow away but a fraction of your hoard for some traveling. The Dice Goblin Barrel is a dice vault where you can flex your dice obsessed bonafides to the rest of your DND group. If your gonna be a dice magpie might as well do it in style!
All parts were printed at 205C to reduce stringing. For the barrel planks, pegs and caps(54) simply copy them out to 18 of them in your slicer of choice. I recommend printing the barrel planks on their sides with supports for the male connection and a brim for stability. The top and bottom caps only need light support on the peg holes(you can try to do without them since they do have a curved ceiling) the top ring has a screw groove that I recommend giving some support. The mid ring just needs support on the bottom aspect. The barrel planks can be snap fitted into the mid ring the last one is a bit tricky but if you slide it alongside its nieghbors and dip it down a bit to slide under the ring while pushing it into the hole it fit without much fuss. Once that's done fit on the bottom and top rings put in the pegs(glue can be optional) and glue on the caps and motiffs(inner one is easier if done before assembly) and viola! You've assembled the Dice Goblin Barrel! Just leave in a well ventilated area for the glue to dry to avoid fume streaking( if it happens a quetip/paper towel with little bit of acetone should do the trick).
| Date published | 17/11/2022 |
| Price | $2.50 |
| Time to do | 16 - minutes |
| Material Quantity | 504g |
| Dimensions | Height: 245mm with lid Diameter of midring: 135mm |