Free Gothic Building Test Print Set G102 GHB102 HMSG102 GR102 GRHB102 HMSGR102
Free Gothic Building Test Print Set G102 GHB102 HMSG102 GR102 GRHB102 HMSGR102
3D
Published 2022-12-12T15:32:39+00:00
This is a free sample pack of my Gothic and Gothic Ruined Buildings. This contains the following
- Gothic Building Mech Scale Test
- Gothic Building Hex Map Scale Test
- Gothic Building Mech Scale with Hex Base Test
- Gothic Ruined Building Mech Scale Test
- Gothic Ruined Building with Rubble Skirt Mech Scale Test
- Gothic Ruined Building Hex Map Scale Test
- Gothic Ruined Building Mech Scale with Hex Base Test
The default hex tile base is the same dimensions as the FASA and Catalyst Games hex battle maps for Battletech.
The hex base is designed to have 3mm ball magnets inserted into it if you wished to use this with my Maghex Tile Terrain. You can see more about my Magnetic Hex Tiles design here:
youtu.be/r56RlRN2w9I
When I print any building from my "Ruined" line I do not print with supports. I try to design in a way that they are not needed. But due to the amount of overhanging parts there will be strands of PLA filament hanging down. I have come to like this look and think it adds to the ruined look, cables and stuff hanging down from the ceilings. I do try and remove the obvious strands. If you do not like the look for want to reduce the strands they are easily removed with a pair of needle nose pliers or tweezers or even your fingers if you have small hands. You may print with supports if you wish to avoid this. But I have not printed with supports.
Please keep in mind, while some of my Hex Map Scale items can be printed with an FDM printer they are designed with printing with a resin printer in mind and not all can be printed on an FDM printer easily. I have found that printing on an FDM printer at 0.14 layer height at 30mm/sec gives me the best results.
You are allowed to print off as many as you wish for personal use but this is not a commercial license. You may not print to sell. If you would like a commercial license to print and sell this item please check out MMF Tribes Program.
| Date published | 12/12/2022 |
| Support Free | YES |
Printed these 3 files today with no issues. They look as good as any I have printed from Wargame Forge. Printed on Elegoo Neptune 3 with PLA+