LIGHTSABER SCABBARD REY SKYWALKER STAFF - THE CUSTOM SABER SHOP MODULAR HILT SYSTEM

A lightsaber scabbard to carry lightsaber in a more stylish way. Make your lightsaber look like a Rey Skywalker inspired bo staff or a futuristic ninja sword (ninjatō).

This scabbard is specifically designed to compliment the design elements of The Custom Saber Shop (TCSS) Modular Hilt System (MHS) emitter styles 1, 2, 3, 4, 13, 21, and 22.

This will accept a lightsaber blade with a 1 inch (25.4 mm) outside diameter.

Printing the numbered parts will fit a blade that is 32 inches (81.3 cm) long. Print the "extra" part and/or additional parts for longer blades. Mix and shuffle the parts to get the length and look you want. Parts glue together.

The Customer Saber Shop - Modular Hilt System NOT Included
(TCSS MHS Lightsaber NOT included)

You will still need:
* about 2 yards (1.8 m) strap 1.5" (38mm) wide.
* 2 rectangular rings 1.5" or 2" wide.
* 1 adjustment buckle 1.5" or 2" wide
* needle and thread to sew the strap to the buckle and rings.
* super glue
* canvas, leather or paracord to wrap parts of the staff/scabbard.
(I will provide links to examples).

Lightsaber NOT included.

PRIVATE USE ONLY.

0.1 or 0.2 layer height
20% infill
Supports ONLY touching build plate.
No raft

The inside diameter of printed part should just be enough to have a light friction fit for a standard 1 inch (25.4mm) diameter blade. the Lightsaber should be easy to draw out but will stay in place when scabbard is held upside down. If too tight, scale model from 101% - 102%. If too loose, scale model from 99.75% - 99%.

To achieve even better effect, print parts 3, 11 and the endcap using translucent material (e.g. translucent resin).

Two parts will require to be paused during print to drop in and capture the Rectangular Ring in the ring holes.