Skip to content

CRAWLER 4320 (Ural 4320 replica) - 1/10 RC BODY

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 14.8k views
  • 56 likes
  • 78 downloads
  • 3 collections
  • 1 make
License
3D design format
DXF, PDF, and ZIP Folder details Close
  • DC exped + single cab mounts on TRX4.zip
    • TRX4 rear mount (stiffer version).stl
    • TRX4 right hole drill aligner.stl
    • TRX4 right mount.stl
    • TRX4 shock brace.stl
    • TRX4 shock mount left.stl
    • TRX4 shock mount right.stl
    • Installation demo.PNG
    • TRX4 left hole drill aligner.stl
    • TRX4 left mount.stl
    • TRX4 rear mount (lighter version).stl
  • New HIGH CLEARANCE version.zip
    • cab full (High Clearance ver).stl
    • cab split cab (High Clearance ver).stl
  • ahead RC Crawler 4320 Single Cab Manual.pdf
  • ahead RC Crawler 4320 Single Cab.zip
    • bumper/bumper hook (1).stl
    • bumper/bumper hook (2).stl
    • bumper/bumper.stl
    • bumper/left bumper light bucket.stl
    • bumper/left bumper light lens.stl
    • bumper/number plate blank.stl
    • bumper/number plate logo.stl
    • bumper/right bumper light bucket.stl
    • bumper/right bumper light lens.stl
    • cab/cab full.stl
    • cab/cab left side panel.stl
    • cab/cab light (1).stl
    • cab/cab light (2).stl
    • cab/cab light (3).stl
    • cab/cab right side panel air filter.stl
    • cab/cab right side panel.stl
    • cab/cab split cab.stl
    • cab/cab split front.stl
    • cab/cab split roof.stl
    • cab/rear windows.dxf
    • door/door handle (1).stl
    • door/door handle (2).stl
    • door/door left 1.stl
    • door/door right 1.stl
    • door/door windows.dxf
    • fender/blinker lens (1).stl
    • fender/blinker lens (2).stl
    • fender/blinker light bucket (1).stl
    • fender/blinker light bucket (2).stl
    • fender/fender left led version.stl
    • fender/fender left.stl
    • fender/fender light (1).stl
    • fender/fender light (2).stl
    • fender/fender right led version.stl
    • fender/fender right.stl
    • fender/headlight bucket (1).stl
    • fender/headlight bucket (2).stl
    • fender/headlight lens (1).stl
    • fender/headlight lens (2).stl
    • fender/light enclosure left.stl
    • fender/light enclosure right.stl
    • grille/grille.stl
    • grille/radiator.stl
    • mirrors/left mirror hinge lower.stl
    • mirrors/left mirror hinge upper.stl
    • mirrors/left mirror mount.stl
    • mirrors/left mirror rail.stl
    • mirrors/left mirror.stl
    • mirrors/right mirror hinge lower.stl
    • mirrors/right mirror hinge upper.stl
    • mirrors/right mirror mount.stl
    • mirrors/right mirror rail.stl
    • mirrors/right mirror.stl
    • mounting/bumper mount v1.stl
    • mounting/bumper mount v2.stl
    • mounting/bumper mount v3.stl
    • mounting/bumper mount v4.stl
    • mounting/bumper mount v5.stl
    • mounting/bumper mount v6.stl
    • mounting/cab hinge (1).stl
    • mounting/cab hinge (2).stl
    • mounting/left magnet mount.stl
    • mounting/right magnet mount.stl
    • ahead RC Crawler 4320 Single Cab Manual.pdf
    • accessories/air filter.stl
    • accessories/badge simple ver.stl
    • accessories/badge.stl
    • accessories/cab handle front.stl
    • accessories/cab handle rear.stl
    • accessories/cab long handle rail.stl
    • accessories/cab short handle rail.stl
    • accessories/horn high profile beep.stl
    • accessories/horn low profile beep.stl
    • accessories/horn square low profile.stl
    • accessories/mushroom.stl
    • accessories/wiper left.stl
    • accessories/wiper right.stl
    • Battery tray/ural dual cab battery tray.stl
    • bonnet/bonnet bump.stl
    • bonnet/bonnet latch (1).stl
    • bonnet/bonnet latch (2).stl
    • bonnet/bonnet smooth.stl
  • windshield left DXF.dxf
  • windshield right DXF.dxf

Learn more about the formats
Last update 2023-06-26 at 05:10
Publication date 2022-05-26 at 06:54
Design number 735913
ahead_RC

ahead_RC

3D printer file info

3D model description

*UPDATE: DXF files for the windshield have been added.

*UPDATE: There is now a "High Clearance Version" of the 4320 Single Cab included made specifically for the TRX4 and TRX6, which allows for more space for the shifting servo and rear diff lock servo. If you find the cab hitting the chassis, this will also allow for more space to clear the chassis and its components.

Likewise if you are planning to use the 4320 DC Expedition Cab with the 4320 Single Cab on a TRX4 chassis, we've also included mounts to make that work. Please note that the mounts will only work for the TRX4's 324mm wheelbase. (i.e. TRX4 Sport or other 313mm wheelbases will not fit using these mounts)*

Similar to the “Crawler 4320 DUAL CAB” RC body we made
(https://cults3d.com/en/3d-model/game/ahead-rc-crawler-4320-dual-cab)

This one also comes with many accessories and addons. Most of the accessories are shared with the Dual Cab and are therefore cross compatible. The 4320 was originally designed to use a 6x6 drivetrain, however this body is ambiguous so it works for both the 6x6 and 4x4 chassis.

If the 4x4 chassis is selected, then a wheelbase of 420mm with tyre height of 120mm and tyre to tyre width of 230mm should be used for true scale proportions. This being a single cab rather than a double, the standard 313mm or 12.3in wheelbase will not look too out of place.

Scale drawn diagrams of 420mm, 353mm, and 313mm wheelbases are uploaded to help you decide which wheelbase is suitable for your build.

In order to use this single cab body with the DC Expedition Cab, a minimal wheelbase of 324mm is recommended. 313mm will make the front wheel very close to the fender when turning. However it will physically fit. Scale diagrams for those are also shown in the pictures. Please note that you will still need to design and use your own mounts when building this configuration.
Link for the DC Expedition Cab: https://cults3d.com/en/3d-model/game/crawler-4320-dc-expedition-cab

With a 6x6 chassis, it would look like a standard “4320” off road truck. We’ve included a scale drawn diagram for Traxxas’s TRX-6 wheelbase.

Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual

Designed to be printer friendly, the parts come in a variety of included options.

Cab:
- Cab full (requires a printer that can print a minimum of 385x175x165mm.
- Cab split version (comes in 3 parts. The cab, roof, and flanks. Requires a printer that can print a minimum of 125x175x150mm.)
- Cab side panels (comes in 2 varieties. The vented version can be fitted onto both sides of the cab. A special version for the right side is also included specifically for use with the air filter.)

Bonnet:
- Bonnet bump (bump version has the engine clearance bump and is more accurate to real life)
- Bonnet smooth (doesn’t have the bonnet bump)

Fender:
- LED version (has cable routing for 3mm LED light for fender indicator light)
- Standard version (Does not have routing, does not have hole to fit 3mm LED light for indicator light. Still allows the cab light bucket to be fitted)

Bumper:
- Blank number plate (hides the 2x bumper mount screws and gives a clean look)
- Logo number plate (ahead RC’s logo on the front. Hides bumper mount screws)
- Custom number plate
- Bumper mount (there are 6 different bumper mounts included)

Accessories:
- Cab side handles (3 types of handles available to mount to the side of the cab)
- Air filter (Can be fitted with the included “mushroom” air filter part)
- Horn (3 styles of horn to choose from)

Some files will need to be printed twice, this includes the following:
Bonnet Latch
Fender light bucket
Fender headlight lens
Fender blinker light bucket
Fender blinker lens
Fender light
Door handle (print a total of 2)
Cab light (print a total of 3)
Accessories cab handle (whichever version you chose, double it)
Bumper hook
Cab hinge

A .zip file containing all the print files is also included for convenience. DXF files for the door and rear windows are also included.

(The wheel hub caps are not included)

We did a Dual Cab version of the build using a custom stretched Axial SCX10 iii chassis. Learn more about this awesome build at our website! Or check out the Dual Cab version of the body below!

https://www.aheadrc.com/custom-builds
https://cults3d.com/en/3d-model/game/ahead-rc-crawler-4320-dual-cab

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Should you need any help, please do not hesitate to contact us!

3D printing settings

FDM printing:

Requires a printer that can print a minimum volume of: 155x175x150mm.

PLA+ filament
0.3mm layer heights
10% infill density
Supports are necessary

Finished and assembled size:
305*230*178mm (All parts assembled including bumper)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.