Jellyfish Dragon, Articulating Flexi Pet, Print in Place, Fantasy
$4.00 Jellyfish Dragon, Articulating Flexi Pet, Print in Place, Fantasy
Published 2022-05-30T12:17:55+00:00
This is a full articulation print-in-place that really flows! Modeled after the Bluebottle Jellyfish!
Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!
This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!
Please share images of your creations here by clicking on +Add your picture! I would love to see them! :)
Commercial License and monthly bonus models:
Tribes
Patreon
To see all things Cinderwing3D, including all of our models (public and exclusive bonus ones) visit our website:
Http://www.cinderwing3d.com/
Please see our other public models here:
https://www.myminifactory.com/users/Cinderwing3D
Check us out on our socials!
Facebook | Twitter | Instagram | Tiktok
FDM settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
All prints are tested down to 60% unless noted otherwise
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexpsore and fused links. The Ameralabs Town testing is highly reocmmended to tune your settings as to get proper articulated prints! Exposure varies greatly bewteen resins, printers, and enviroments.
Date published | 30/05/2022 |
Price | $4.00 |
Support Free | YES |
Protopasta Nebula - 3 walls - 10% gyroid infill - Brim with 0.3 space - 0.2 Layer Height - 50 mm/s speed - 25 mm/s wall speed - 10mm/s initial