Happy owl

If you like our models, want to sell them or get early access to the latest creations with a special discount, check out our Patreon:

https://www.patreon.com/Madistudios

Video OWL:

https://www.youtube.com/watch?v=U3ZH3MbqDwE

These are a pack that includes 2 different models, Flexi and moving head owls, both are printed in place and does not require supports. There are three files:

FLEXI OWL It moves, it dances, it shakes, it is a happy OWL!!!
1-Big flexi owl.stl ( bigger and more rigid use this for big models, it is scalable )
2-Small flexi owl.stl (smaller and sofer use this for small models, it is scalable)
360º MOVING HEAD OWL

3-360 Moving head owl.stl It is printed on one part and the head is balanced so can move freely and rotate 360º becoming a very friendly movement as the real owls! The head is fixed to the body, but can can force it and take it away in case you want to replace it and do it with another color. It is scalable.

Hope you enjoy it and feel free to share your images prints with the community.

If you like the owl you can check my other happy flexi models.

https://cults3d.com/en/3d-model/art/happy-penguin-tux
https://cults3d.com/en/3d-model/naughties/happy-penis

Easy to print no supports required, print in place.

important:

-Make sure you have the retractions well calibrated
-Make sure you have activated the thin walls option

Recommended material PLA
Line width : 0.44mm
In-fil:l 20%
Layer-height: 0.2mm
Shell: 3
Support: Not

small flexi owl: 3h 45m and 28g
Big flexi owl 8h 53m 70g
Moving head owl: 5h26m 54g ( original size)