PRINT IN PLACE STORAGE BOX
$1.50 PRINT IN PLACE STORAGE BOX
3D
Published 2022-06-13T09:32:27+00:00
NOTE: Copyright PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE:
https://www.patreon.com/PA1_MAKER
Nice storage box to test your printer.
You will need a well calibrated printer, but its easy to print, tolerances are user friendly and with a decent printer you should be able to print this with no problem at all.
-No support needed
-No assembly required (except for the diamond on the side if you wanna use it! :p )
-Just print and enjoy
-Files already placed in the right orientation in three formats:
Ender 3
Prusa Mk3s
Cr10
You can scale the file as you wish. Up or down. I've tried 50% of the prusa file and it worked like a charm.
The diamond on the side is not necessary, but i think it gives a little touch to the box. I have choosed glow-in-the-dark filament for this part as you can see in the pictures.
Works well with layer height of 0.2mm and under. Over 0.2 its not recommended, as the joints won't be perfectly round and you may experience some stuck articulations.
NOTE: FOR COMMERCIAL USE (SELLING YOUR PRINTS), YOU MUST JOIN MY PATREON, WHICH INCLUDES: FULL ACCESS TO ALL MY MODELS, EXCLUSIVE STLs AND COMMERCIAL LICENSE! JOIN MY PATREON HERE:
https://www.patreon.com/PA1_MAKER
| Date published | 13/06/2022 |
| Price | $1.50 |
| Support Free | YES |