Wall Hooks for Hanging Free 3D print model

These are small wall hooks that are fixed using nails.

There are 2 types of plates and 2 types of hooks. The data format is STL.

You can use any color material you like. ABS is recommended for the material.

[Data list] Plate-one-hole.stl, Plate-two-holes.stl, Heart-one-hole.stl, Heart-two-holes.stl, Hook-for-nail.stl, Normal-hook.stl

The plate and hook are separated in consideration of the strength of the 3D print stacking direction. Please print like an image.

Insert the hook diagonally into the plate. (Refer to photo) Glue the hook and plate.

And fix it on the wall with nails (diameter 2mm or less). When fixing with nails, be careful not to hit the hook or hit it too hard.

Be careful of strength when hanging heavy objects on this model.