MkVII Knife Attachment 3D Print File 3D print model

*Halo Knife Attachment files for 3D printing. *

The knife is already sized to fit a cosplay suit. Some slight sizing might be required as preferred. All files are in .stl format, the files include:

1. Individual parts;
   • All parts of the attachment are separated and oriented for ease of printing and painting.
   • Minimal supports needed in FDM printers, can also be printed in medium-sized resin printers.
     
2. Knife (One piece).
3. Sheath. (One piece).
4. Full Attachment (One piece).
   • Mainly used for sizing and previewing.

UPDATE V2:

1. Updated the sheath model to have higher clearances inside and split into 2 pieces that can be fixed with screws/glue. This allows for a thin piece of 1mm foam or microfiber cloth to be placed inside to prevent the blade paint to be scratched. Some sizing might be required depending on the printer. (Higher size difference between the sheath and the blade = the higher the clearance)

3D files are for personal use only.

Model tolerances are good for printing, pieces should snap together and the knife should stay in place. Let me know if you have any issues/feedback with the model and I'll check it out!

Thank you for checking my listing by the way!