SANTA FE STREAMLINER H0 BAGGAGE CAR 3D print model

This is a model of the Sante Fe Streamliner Train baggage car. You can print the model for h0 scale.

I recommend to print the model directly in silk silver pla from eryone, here you find the amazon link: https://www.amazon.de/Filament-1-75mm-ERYONE-Printing-Printer/dp/B07KF22GN5/ref=sr_1_5?keywords=eryone+silk+silver&qid=1660380529&sprefix=eryone+silk+sil%2Caps%2C88&sr=8-5

Fitting for this model, you can find here our streamliner baggage car design: https://www.cgtrader.com/3d-print-models/hobby-diy/other/amtrak-streamliner-coach-h0-scale

For more information related to this or other of our projects, feel free to visit our Instagram channel: https://instagram.com/aska_modelle?igshid=YmMyMTA2M2Y=

or visit us on Facebook: https://www.facebook.com/profile.php?id=100084394207023

To print the shell, do not fill the whole shell with support material. Just place three or four supports over the length of the shell. Make sure, that they are not connected to the walls, so it is easier to remove them after printing. Maybe just add some supports for detail parts on and above the bellows. I recommend to use white pla, and colour the car after printing. Also the windows in the shell can be printed without supports. It worked perfectly on my cr10. For the chassis, use only supports, that are connected to the printing bed. The Bogies can be printed without supports, while printing, for printing turn them upside down. Use part2 to mount the bogies to the chassis. The bogies can be equipped with normal h0 scale wheelsets of your trusted manufacturer.

Here you can find