Gauge Key Hanger NFS Underground 2 #1

Put down the keys, put the pedal to the metal and hit the Nitro.

Easily mount it to the wall with a single screw. You don't need any additional parts that aren't 3D printed, but it does require the use of a few drops of glue.

Printing and filament color changes are very easy to do. With only 9 pieces that make up the design.

Ring to hang your keys is a collaboration with

@asx_impressao3d

Hoop only for version 2.0

Parts are compressed into .rar or .zip files

**Magnetic Pedals Update

Use 10mm x 3mm Magnets

Use basic parameters:

Quality or resolution of: 0.2 mm

Grid or gyroid type filling, density 5%

*The "Turbo" turn signal pendulum or counterweight parts must be printed with more than 40% infill. You can also print with 11% grid-type infill and mid-print add 15 6mm diameter steel balls; as the pedal is heavier, it returns more easily to its place..

Simple zigzag support

No adherence to the bed.

Wall, base and roof thickness: 0.8 mm at 3 layers

Color change

"Gaugue" piece:

Initial color: Black

Second Color: Red #11

Third Color: Silver layer #17

Fourth Color: White layer #24

Fifth Color: Silver layer #32

**Indicator" parts.

Initial Color: Gray "or Silver" 2mm

Secondary Color: White 2.1mm or layer #11

**Part "NO2".

Initial Color: Blue 1.5mm

Secondary Color: Black 1.6mm or #9 layer

Assemble 7 steps, images included in file.