Skip to content

FLEXMOUNT [BRACKETS] by YANNIK.FPV

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 6k views
  • 13 likes
  • 301 downloads
License
3D design format
STL Folder details Close
  • FlexMount_BracketsV3_19_Raptil-Cloud.STL
  • FlexMount_BracketsV3_21,2x24x30_Sector30CR.STL
  • FlexMount_BracketsV3_22x30_TBS-SourceOneV5.STL
  • FlexMount_BracketsV3_23,8x29x43,55_QAVs.STL
  • FlexMount_BracketsV3_24,5x28,5x55_TMotor_FT5_MKii.STL
  • FlexMount_BracketsV3_246x35x24_PirateHookV2.STL
  • FlexMount_BracketsV3_24x26,8x54,5_HGLRC_Sector5v3.STL
  • FlexMount_BracketsV3_24x26,8x54,5_Sector5.STL
  • FlexMount_BracketsV3_24x40_APEX-5inch.STL
  • FlexMount_BracketsV3_24x40_TBS-SourceOneV4.STL
  • FlexMount_BracketsV3_24x40_TBS-SourceOneV4_APEX.STL
  • FlexMount_BracketsV3_24x42_VegaGravity.STL
  • FlexMount_BracketsV3_25_Cinelog25.STL
  • FlexMount_BracketsV3_25_Cinelog35.STL
  • FlexMount_BracketsV3_25x20x21_FlywooLR4.STL
  • FlexMount_BracketsV3_25x31,5_GepRC-Mark5HD.STL
  • FlexMount_BracketsV3_25x35_APEX-clone.STL
  • FlexMount_BracketsV3_25x35_APEX-clone.STL
  • FlexMount_BracketsV3_25x37_Nazgul5V2.STL
  • FlexMount_BracketsV3_25x40_RotorRiotHD1.STL
  • FlexMount_BracketsV3_26+31x37_Speedybee_FS225V2.STL
  • FlexMount_BracketsV3_26,5x28,5x48_QAVs-JonnyFPV.STL
  • FlexMount_BracketsV3_27x25x43_FusionC220.STL
  • FlexMount_BracketsV3_27x32x49_GRLpro2-DeadCat.STL
  • FlexMount_BracketsV3_27x32x49_GRLpro2.STL
  • FlexMount_BracketsV3_27x35_SquirtV2.STL
  • FlexMount_BracketsV3_27x39_Eachine-Cvatar.STL
  • FlexMount_BracketsV3_28x14x40_Protek35.STL
  • FlexMount_BracketsV3_30+20x33,9_GepRC-Mark4.STL
  • FlexMount_BracketsV3_30,5x42,2_TBS-SourceOneV3.STL
  • FlexMount_BracketsV3_31+20x38_GepRC-Mark4HD.STL
  • FlexMount_BracketsV3_31+27x32_romaF5.STL
  • FlexMount_BracketsV3_32x32_AOS5.STL
  • FlexMount_BracketsV3_32x46_Martian2.STL
  • FlexMount_BracketsV3_39x35_FlexoneV2.STL
  • FlexMount_BracketsV3_44x27_FoxxerAura5.STL
  • FlexMount_BracketsV3_55x28_HGLRC_sector5.STL
  • FlexMount_BracketsV3_55x28_HGLRC_sector5v2.STL
  • FlexMount_BracketsV3_AOS_3.5v2.STL
  • FlexMount_BracketsV3_Ethix_Cinerat.STL
  • FlexMount_BracketsV3_FlowFrame_FlowV3.STL
  • FlexMount_BracketsV3_FlowX_mini.STL
  • FlexMount_BracketsV3_NAZGUL_TITANxl5v4.STL
  • FlexMount_BracketsV3_betaFPV_x-knight35.STL
  • FlexMount_BracketsV3_iFlight_Chimera7.STL
  • FlexMount_Brackets_Amax_F5L.STL
  • FlexMount_Brackets_Amax_F5P-old.STL
  • FlexMount_Brackets_Botgrinder_Demibot.STL
  • FlexMount_Brackets_Dauch_Vega-FX-SBando_5inch.STL
  • FlexMount_Brackets_DavideFPV_D-RockV2.STL
  • FlexMount_Brackets_Diatone_RomaF7.STL
  • FlexMount_Brackets_Diatone_Taycan.STL
  • FlexMount_Brackets_EVOQUEv2(o3).STL
  • FlexMount_Brackets_FETTEC_Gravity-FG1.STL
  • FlexMount_Brackets_FlyfishRC_Volador5.STL
  • FlexMount_Brackets_Flywoo_Mr.Croc.STL
  • FlexMount_Brackets_Foxeer_Aura5v2.STL
  • FlexMount_Brackets_Fusion_ProWhoop.STL
  • FlexMount_Brackets_HAOYE-RC_X1.STL
  • FlexMount_Brackets_HGLRC_SectorD5.STL
  • FlexMount_Brackets_Heks_Joocy.STL
  • FlexMount_Brackets_Hyperlite_Freerange5inch.STL
  • FlexMount_Brackets_KINfpv_AtlasV2.STL
  • FlexMount_Brackets_Monsterquads_XR225.STL
  • FlexMount_Brackets_Newbeedrone_VividHD.STL
  • FlexMount_Brackets_Pikfrite.STL
  • FlexMount_Brackets_PirateFrames_LiL'Matey.STL
  • FlexMount_Brackets_PowerPete500_GepRC-Cinelog35.stl
  • FlexMount_Brackets_QAV_Pro2.5.STL
  • FlexMount_Brackets_RotorRiot_Vannystyle5inch.STL
  • FlexMount_Brackets_TBS-SourceOneV5_DJIo3-mod.STL
  • FlexMount_Brackets_Vroom_Acrobatic.STL
  • FlexMount_Brackets_XXX_Mole5.STL
  • FlexMount_Brackets_XXX_Mole5.STL
  • FlexMount_Brackets_iFlight_BumblebeeV2.STL
  • FlexMount_Brackets_iFlight_Chimera4.STL
  • FlexMount_Brackets_impulseRC_APEX-3inch.STL
  • FlexMount_Brackets_impulseRC_APEX-3inch.STL

Learn more about the formats
Last update 2023-04-05 at 17:29
Publication date 2022-08-12 at 09:23
Design number 810540
yannikfpv

yannikfpv

3D printer file info

3D model description

The Flexmounts system revolutionizes the mounting of action cameras on FPV drones. Slide in, in seconds, without tools. Visit my social media for more shots and insights.

The Flexmount System makes it possible to mount (almoast) any action camera on (almoast) any frame. Just look for the brackets for your frame (if they havent been done yet, contacte me).

This is the bundle of all brackets for most common FPV frames.
For the actiooncam mounts please visit the entire collection and download your mounts.

This Collection is no longer getting updates - please check the Bandoproof collection for all available frames

Supported Frames:
- Airflex FlexOneV2
- Amax F5L
- Amax F5P (old)
- AOS 3.5v2
- AOS 5
- APEX 5inch clone
- APEX 3inch clone
- Armattan Beaver
- betaFPV x-knight35
- Botgrinder Demibot
- DavideFPV D-Rockv2
- Diatone Roma5
- Diatone Tycan
- Diatone Roma F7
- Eachine Cvatar
- KINfpv Atlas V2
- TBS Ethix CineRat
- TBS SourceOne v3
- TBS SourceOne v4
- TBS SourceOne v5
- TBS SourceOne v5 (o3-mod)
- FlowFrame Flow V3
- FlowX mini
- FlyfishRC Volador5/6/7
- Flywoo LR4
- Flywoo Mr.Croc 5/6/7
- Foxeer Aura5
- Foxeer Aura5 v2
- Fusion C220
- Fusion ProWhoop
- FETTEC Gravity FG1 (gets fixed into the first and third screw-row!)
- GepRC Cinelog25
- GepRC Cinelog35
- GepRC Mark4
- GepRC Mark4HD
- GepRC Mark5HD
- GRL pro2
- GRL pro2 Deadcat
- Heks Joocy
- HGLRC Sector 5v2
- HGLRC Sector 5v3
- HGLRC Sector 30CR
- HGLRC Sector 50CR
- HGLRC Sector D5
- Hyperlite Freerange 5inch
- HAOYE-RC X1
- iFlight Nazgulv2 & Evoque
- iFlight Nazgul & Titan xl5v4
- iFlight Chimera 4
- iFlight Chimera 7
- iFlight Protek35
- iFlight Bumblebee V2
- impulseRC Alien
- impulseRC Apex 3inch
- impulseRC Apex 5/6/7 inch (+Deadcat)
- MarcCeretten Flux Whoop
- MarcCeretten Flux 5inch
-Monsterquads XR225
- Newbeedrone VividHD
- Pirateframes Hookv2
- Lumenier QAV Pro2.5
- Lumenier QAV-S 5inch
- Lumenier QAV-S 5inch JohnnyFPV
- Raptil Cloud
- Rekon 7
- RotorRiot HD1
- RotorRiot Vannystyle 5inch
- RushFPV STP-Gunn V2
- Shendrones Squirt v2
- Speedybee FS225 v2
- TCMM Martian2
- Tmotor FT5 MK II
- Vega Gravity 5
- VIKEP Papilio 5
- Vroom Acrobatic
- XXX Mole5
- XXX PikFrite

SPECIAL NOTES:

β€’ most brackets are two parts and easily get screwd on the first 4 screws
β€’ some frames (smaller ones and cinewhoops) are connected together to ensure a safe mounting
β€’ some frames (e.g. the tMotor FT5) requieres an additional cable tie bc. the brackets is simply too loong to ensure a safe hold

This is part of the Free-Flexmount collection. further developments of the mounts can be found in my Bandoproof-Flexmount Collection for a few bucks

3D printing settings

Brackets are best printed in TPU (100% infill !!!).
People also print them in PLA or PETG and carbon.

Just check if the camera mount is fitting well and the mount willl not fall of while flying.

If you run into any problems or have any questions please contact me through my social media -> instagram.com/yannik.fpv

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.