ATTENTION! READ CAREFULLY BEFORE PURCHASING: The print has only been tested on resin, due to its details, good results are not guaranteed on filament printers.
-Downloading only entitles the purchaser to personal use of the file. -
-It is forbidden by the author the commercialization, transfer or profit of the file by unauthorized third parties.
-Modification of the original file is prohibited.
-This is a model for diorama decoration, the wheels.
do not rotate.
PRINTER: Anycubic Phpton Mono x 6k
3D PRINTING PARAMETERS
-Printed using LycheeSlicer software.
-It is designed to be printed in resin. The results in
PLA may not be satisfactory.
-It is possible to print it with automatic media, however it is.
important to deactivate the auto orientation tab of the
The supports would spoil the details of the
sides. It is also recommended to deactivate the "bracket groups" option.
-At scales between 1:400 and 1:500 light supports give the best result.
-The ideal is to print the part as is (as if the wheels touch the printing plate) but adding the supports, obviously.
-I added a file with the parameters and the ideal print position for reference.
BASE LAYERS:
-Number of layers: 6
-Exposure time: 28s
-Transition layers counter: 3
-Lift distance: 4 - 3 mm
-Lift speed: 60 - 180 mm/m
-Retract Speed 60 - 180 mm/m
NORMAL LAYERS
-Layer height: 34 um
-Light off delay 1s
-Exposure time 3.5 s
-Lift distance: 3 - 4 mm
-Lift Speed 60-180 mm/m
-Retract Speed 60- 180 mm/m
SCENE SCALE COMPENSATION
-Scale X: 100% -Scale X: 100% -Scale X: 100% -Scale X: 100% -Scale X: 100%
-Scale Y: 100% -Scale Y: 100%
-Scale Z: 100%
-A white primer coat is recommended before painting vehicles.
ATTENTION! READ CAREFULLY BEFORE BUYING: The print has only been tested in resin, due to its details good results are not guaranteed in filament printers.
-The download only gives the right to a personal use of the file by the person who buys it. -
-It is prohibited by the author the commercialization, assignment or benefit of the file by unauthorized third parties.
-Modification of the original file is prohibited.
-This is a model for diorama decoration, the wheels
they don't rotate
PRINTER: Anycubic Photon Mono x 6k
3D PRINTING PARAMETERS
-It has been printed by LycheeSlicer software.
-It is designed to be printed in resin. The results in
PLA cannot be satisfactory.
-It is possible to print it with automatic supports, however it is
important to disable the auto orientation tab of the
piece, since the supports would affect the details of the
sides. It is also recommended to disable the option "support groups".
-In scales between 1:400 and 1:500, light supports are the ones that give the best results.
-The ideal is to print the piece as it is (as if the wheels touched the printing plate) but adding the supports, obviously.
-I add a file with the parameters and the ideal printing position as a reference.
LAYER BASE:
-Number of layers: 6
-Exposure time: 28s
-Transition layer counter: 3
-Lifting distance: 4 - 3 mm
-Lifting speed: 60 - 180 mm/m
-Retraction speed 60 - 180 mm/m
NORMAL LAYERS
-Layer height: 34um
-Light off delay 1s
-Exposure time 3.5s
-Lifting distance: 3 - 4 mm
-Elevation speed 60-180 mm/m
-Retraction speed 60- 180 mm/m
SCENE SCALE COMPENSATION
X-Scale: 100% -X-Scale: 100% -X-Scale: 100% -X-Scale: 100% -X-Scale: 100%
-Y-Scale: 100%
-Z-Scale: 100%
-A coat of white primer is recommended before painting vehicles.