Clear-View Anti Fog Unit

Clear-View Anti Mist System

(Previously sold under license by Airtac UK) Airtac unfortunately doesn't have the production time for the units anymore so I have take the sale digital.

The clear-view system works by increasing the airflow around your eye pro. The high flow of air means we don’t need to insert the ducts into your goggles, saving cutting holes in the seals.

For Fast-Helmet wearers we have a distribution rim that attaches to the helmet so a curtain of cool external air is blown over your face and eye pro. The curtain of air provides the increased airflow around your eye protection to stop it misting up. (Distribution rim not included in basic package).

We also have a set of ducting clips for wearers of Bolle Tracker II’s, Bolle Pilots, X800's, X1000's or Sawflys. These clip onto the frame with no drilling or glue. The directed air flow from the system into the sides of the lenses keeps these common and cheap safety glasses clear of mist. (Specific eye pro mounts not included in basic package).

Should you be using the standalone ducting, the ducts should be aligned with the air holes already present in your eye protection for this system to work.

The system uses the common 18650 rechargeable Li-ion battery which will power the system for over 20hrs on one charge. The system has inbuilt discharge and charge protection circuits for the safety of the end user. By having an accessible construction and using the 18650 battery. We this allows the end user to replace the battery should it wear out with ease even after years of use.

Photos of unit and it in a FMA NVG counter pouch.

This pack includes:
Solder Jig,
Single fan system,
Double fan system,
Cover plate - with curve for helmets,
Cover plate - flat,
Cover plate - with clip for straps or goggle bands (to be used with flat cover plate,
Clips for fixing tubes to air holes on top of fast helmets,
90 deg Connector
135 deg Connector
Z Connector

Connectors can be made for either side by mirroring in your slicer

PLA+ 3-5 walls. Dense infill.

Clear-View Parts List
5V 4010 blower fan, (2 for the double box)
TP4056 Micro USB Charge Board, (Type with 3 chips on see photo. There are different types with same name).
18650 Li-ion button top battery
18650 battery holder. (See photos for type).
10mmx15mm Rocker Switch
1.0m of 10OD 8ID PVC tube.
2No. M2 6mm single fan or 12mm for the double fan, allen bolt socket cap screw.
4No. M3 10mm counter sunk screw.
2No 25mm wide 80mm long strips on hook Velcro is attaching to a fast helmet.

How to video
https://youtu.be/TnzjJ3h6wPA